Livarno KT-1410 User Manual download pdf (Page 5)

Assembly

Step 1:

Using the screw wrench, attach the rollers

to the H-shaped sub-frame (Fig.1).

Step 2:

Attach the table frame to the H-shaped sub-frame.

Use the 2 washers in conjunction with the screws

which have also been included. Attach the central

pole as shown in Fig. 2.

Step 3:

Loosen the black plastic cap from the end of the

L-shaped table frame. Press in the metal pin and

simultaneously remove the plastic cap (Fig. 3).

Step 4:

Push the table frame through the eyelets which are

fastened to the tabletop. At the same time, the ring

fastened to the tabletop for inclination setting must be

connected to the central pole (Fig. 4).

Step 5:

After you have pushed the table frame through both

eyelets, replace the plastic cap on the end of the

table frame (Fig. 5).

Adjusting the table height

Loosen the screws with the plastic grip and set the

table to the desired height. Then retighten the screws

(Fig. 6).

Fig. 3

Fig. 2

Fig. 1

Fig. 4

Fig. 5

Fig. 6

1 2 3 4 5 6 7 8 9 10 ... 19 20

No comments

Livarno KT-1410 User Manual Page 5