Livarno 3940-052L User Manual download pdf (Page 8)

9 GB

Start-up / Maintenance and cleaning / Disposal

Switching the luminaire on / oﬀ

You have the possibility of operating the luminaire

from an ordinary wall switch or switching it on and

oﬀ using the supplied remote control unit.

Switching the luminaire on / off using the

remote control unit:

– The wall switch is in basic position (OFF).

Activate the wall switch (ON).

Press the ON button of the remote control unit

to switch on the luminaire.

Press the OFF button of the remote control unit

to switch oﬀ the luminaire.

Switching the luminaire on / off using the

wall switch:

– The wall switch is in basic position (OFF).

Switch on the luminaire by activating the wall

switch (2–3 switch cycles). The luminaire can

subsequently be switched on and oﬀ via the

wall switch or the remote control unit

Fault correction: If the remote control unit

does not respond after switching on the luminaire,

ﬁrst activate the wall switch to switch oﬀ the lumi-

naire. Then wait for 15–20 seconds and repeat the

2nd point under „Switching the luminaire on / oﬀ

via the wall switch“. If after switching on the lumi-

naire again via the remote control unit

the lumi-

naire still does not respond, check the batteries in

the remote control unit

Changing the bulb

CAUTION! DANGER OF ELECTRIC SHOCK!

To replace the bulb, ﬁrst disconnect the luminaire from

the mains circuit. To do this, remove the fuse or switch

oﬀ the circuit breaker in the fuse box (0 position).

CAUTION! DANGER OF BURN INJURIES!

Allow the luminaire to cool completely.

Replace the bulb

only after it has fully

cooled.

Turn the defective bulb

carefully anticlock-

wise out of the bulb socket

Use a clean, lint-free cloth to replace a bulb.

Only use 220–240 V∼ energy-saving bulbs

with an E14 base and a maximum power out-

put of 9 watt.

Screw the new bulb

into the bulb socket

clockwise. Check for proper seat.

Maintenance and cleaning

CAUTION! DANGER OF ELECTRIC SHOCK!

To clean the luminaire, ﬁrst disconnect it from the

mains circuit. To do this, remove the fuse or switch

oﬀ the circuit breaker in the fuse box (0 position).

CAUTION! DANGER OF ELECTRIC SHOCK!

For electrical safety reasons, never clean the luminaire

with water or other ﬂuids nor immerse it in water.

CAUTION! DANGER OF BURN INJURIES!

Allow the luminaire to cool completely.

Do not use solvents, benzene or similar subs-

tances. They could damage the luminaire.

Only use a dry, lint-free cloth for cleaning.

Disposal

The package and packaging materials consist enti-

rely of environmentally friendly materials. They can

be disposed of at your local recycling facility.

The symbol of the dustbin with the line

through it means that in the European

Union the product must be disposed of

in a separate trash collection. This applies to the

product and to all components bearing this symbol.

Products marked in this manner must not be disposed

of along with normal household waste, but rather

must be taken to a recycling collection point for

electrical and electronic appliances. Recycling helps

to reduce the consumption of raw materials and

protects the environment.

Batteries must not be disposed of in the household

trash! Return batteries and / or the device to a a lo-

cal recycling facility.

Prior to installation / Mounting / Start-up

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Comments to this Manuals

No comments

Livarno 3940-052L User Manual Page 8

Comments to this Manuals

Related products and manuals for Lighting Livarno 3940-052L